HiVizz Security, owner‑operated and offering 4K CCTV installations with free on‑site quotes, serves Bendigo, Ballarat, Geelong, Melbourne and surrounding Central Victorian areas. A sensible camera layout for a typical Bendigo home covers all entry points, key outdoor zones and busy indoor spots while respecting neighbours’ privacy. Follow the advice below and you’ll know exactly where to mount cameras for clear footage, then you can request a free on‑site quote within 2 business days from HiVizz Security.
Key entry points every Bendigo home should monitor
We suggest watching the main ways people can get into the house.
- Front door and porch – Place a camera at eye level (about 2.4 m) looking down the walkway so faces and vehicle plates are captured.
- Back door and side gates – Intruders often target secondary doors. A camera covering the rear side of the house, especially near any side gate, lets you see anyone approaching from the garden or lane.
- Garage door and driveway – The garage holds tools and a vehicle. A wide‑angle camera aimed at the garage door and driveway records both people and cars entering or leaving.
- Rear yard and blind‑spot corners – Larger properties can hide corners behind fences or trees. Position a camera where it can see the farthest corner of the yard, preferably on a higher pole or roof eave.
These zones give you a solid perimeter view. HiVizz Security can supply and install cameras from Only Dahua, Hikvision, HiLook, UNV, HiVizz, Ubiquiti – your choice of 4K brand – and will wire each unit to a reliable NVR (network video recorder) for continuous storage.
Mounting height and angle for clear footage
A good height keeps the camera out of reach but still captures useful detail.
- Mount height – Industry standard residential camera mounting height is 2.4 m to 3 m to balance facial identification with out-of-reach tamper resistance.
- Tilt angle – Recommended downward vertical tilt angle for residential entry/driveway cameras is 10°–16° to capture faces and avoid horizon glare.
- Use tamper‑resistant brackets and stainless‑steel screws so vandals can’t easily loosen the mount.
Plain English tip: PoE (Power over Ethernet) carries both power and data over a single cable, making installation simpler. If you opt for a PoE‑enabled model, we’ll provide the switch or injector you need.
Reducing glare, blind spots and privacy issues
Three practical steps keep your footage clear and compliant.
- Avoid direct sunlight on lenses – Aim cameras so the sun is behind them during the brightest part of the day. Overexposed video is hard to use.
- Trim overhanging branches – Trees that block sightlines create blind spots. A quick trim improves coverage and cuts down on false motion alerts.
- Mind neighbour privacy – Point cameras only at your own property. Victoria's legislation is the Surveillance Devices Act 1999 (not 2020). Section 7 regulates optical surveillance (Section 4 is titled 'Act binds the Crown', whereas Section 5 is titled 'Act not to apply to certain Commonwealth agents'), and incidental capture of public footpaths is lawful as there is no reasonable expectation of privacy in a public street. We’ll help you set the right angle and can install a clear sign that CCTV is in operation.
Connecting indoor and outdoor cameras
Using the same brand for all cameras makes the system easier to manage and keeps video quality consistent.
- Put indoor cameras in hallways, living rooms and stairwells – These high‑traffic areas let you see who’s moving inside after they’ve entered the yard.
- Link indoor feeds to the outdoor NVR – The NVR stores footage from every camera, giving you a single timeline to review incidents. We’ll configure the NVR, set up the network, and show you how to pull up footage from any camera on your phone.
Legal and privacy basics for Victorian homeowners
We make sure every install follows local rules.
- Don’t capture neighbours’ property – Aim each lens so it stops at your fence line or property boundary.
- Display a clear CCTV sign – while not a statutory requirement under the Surveillance Devices Act 1999 (Vic), signage is recommended as a deterrent and courtesy.
- Store footage securely and only as long as needed – A 30-day continuous or event‑based retention baseline before loop overwrite is standard practice for residential and commercial NVR setups.
For more detail on Victorian rules, see our guide on CCTV privacy guidelines in Victoria.
Frequently asked questions
Q: Do I need a licence to install cameras at home? A: HiVizz Security is fully licensed (Z84‑093‑40S) to install security systems in Victoria, and we handle all compliance matters for you.
Q: Can I view live footage on my phone? A: We’ll set up the network so you can stream live video and receive motion alerts on your mobile device using the official app provided by the camera brand (e.g., Dahua DMSS or Hikvision Hik‑Connect). HiVizz does not have its own proprietary app.
Q: What warranty does HiVizz provide? A: We offer a 2‑year warranty on products and a 1‑year warranty on workmanship.
Q: How quickly can I get a quote? A: We provide a free on‑site quote within 2 business days of your request. Our team will visit your Bendigo or Castlemaine property, assess the layout and give you a detailed proposal at no charge.
Q: Is HiVizz an Australian‑owned company? A: Yes – HiVizz Security is Australian‑owned, owner‑operated and based in Marong, just north of Bendigo. We know the local weather, NBN connectivity and the security challenges faced by Central Victorian homes.
Next step
Ready to protect your Bendigo home with a professionally designed camera layout? Get a free on‑site quote within 2 business days by calling 0406 048 875, visiting our Security cameras in Bendigo page, or booking a visit through our Professional CCTV installation service. HiVizz Security is here to keep your property safe with quality equipment, expert installation and ongoing support.