In Bendigo, CCTV installation typically costs between $800 for a basic 2‑camera system and $4,200 for a comprehensive 8‑camera setup, with most homeowners spending around $1,500‑$2,300 for a 4‑camera install in total.
What is the typical cost range for a 2‑camera CCTV system in Bendigo?
A 2‑camera CCTV system from HiVizz Security in Bendigo generally runs between $800 and $1,200. That price covers two mid‑range 2K/4K cameras, an NVR (network video recorder – a device that stores and manages video footage), cabling, mounting hardware and the labour to install everything. The final amount can vary depending on the resolution you pick, how long the cables need to be and how easy the site is to reach.
Two cameras work well for a modest home or a single shop front, keeping an eye on the door and the driveway.
How much does a 4‑camera CCTV installation usually cost in Bendigo?
A 4‑camera install in Bendigo normally falls between $1,500 and $2,300. That includes four mid‑range 2K/4K cameras, a bigger NVR, all the wiring and the installation labour. If you need longer cable runs or have a two‑storey house, expect an extra $100–$300.
With four cameras you can watch the front, side and rear of the property, plus get an indoor view of a main room or office.
What price can you expect for an 8‑camera CCTV system in Bendigo?
An 8‑camera system in Bendigo is quoted between $2,800 and $4,200. That price covers a higher‑capacity NVR, an optional PoE (Power over Ethernet – technology that supplies power to cameras via network cabling) switch and the complete installation. If the roof is tricky or you need underground cabling, labour costs can rise above the base figure.
Eight cameras make sense for larger homes, small businesses or any site with several entry points that needs thorough perimeter monitoring.
What factors influence the cost of CCTV installation?
- Camera resolution – a 2K unit costs about 15‑20 % less than a 4K one.
- Number of cameras and lens type – adding more cameras or specialised lenses pushes material costs up.
- Cable length and conduit – longer cable runs and extra conduit add to material and labour expenses.
- Property size – wiring a single‑storey home is cheaper than a two‑storey or multi‑level building.
- NVR storage – upgrading to larger internal hard drives adds a one-off upfront cost of roughly $50–$100 to the system price, with zero recurring subscription fees.
- Site accessibility – working on a steep roof, digging trenches or dealing with heritage‑listed structures can raise labour expenses.
How does camera resolution (2K vs 4K) affect the price?
A 2K camera costs roughly 15‑20 % less than a 4K model, so it’s often the cheaper option for most homes. 4K cameras capture finer detail, which can be handy for big yards, commercial sites or when you need high‑resolution footage for insurance or police reports. The trade‑off is more storage – expect a one-off upfront cost of $50–$100 for a larger surveillance hard drive, with zero recurring fees.
Do cable runs and building size impact installation costs?
Standard cable runs are covered in base installation packages. Longer runs or additional conduit will push both material and labour costs higher. Two‑storey homes usually need extra labour to route cables safely through ceilings, wall cavities and attics. Longer runs or underground conduit will push both material and labour costs higher.
What warranty and liability coverage does HiVizz Security provide?
We give a 24‑month parts and labour warranty on every camera and piece of equipment, and we carry $10 million public liability cover for added peace of mind. There’s also a 12‑month workmanship warranty on the installation itself, so any problems that show up after we finish are dealt with quickly.
How can I get a free on‑site quote for my CCTV project?
Give us a call on 0406 048 875 or email [email protected]. We’ll arrange a free on‑site assessment within 2 business days and send you a detailed, no‑obligation quote that breaks down every component and labour cost.
You can also read more about what we do on the CCTV installation services page, check out our story on the About HiVizz Security page, or click the Get your free quote button.
CCTV installation cost comparison table (Bendigo)
| Camera count | Indicative price range | Typical resolution | Key cost drivers |
|---|---|---|---|
| 2‑camera | $800 – $1,200 | 2K or 4K | Camera type, cable length, site access |
| 4‑camera | $1,500 – $2,300 | 2K or 4K | Number of cameras, longer runs, multi‑storey |
| 8‑camera | $2,800 – $4,200 | 2K or 4K | Higher‑capacity NVR, PoE switch, complex routing |
All figures are indicative and will vary based on your exact requirements.
FAQ
Q: How long does a CCTV installation usually take in Bendigo? A: Most standard residential installations take from several hours up to a couple of days depending on camera count and site complexity, though complex sites or bad weather can add time.
Q: Do I need a separate PoE switch for my cameras? A: If you have more than four PoE cameras we recommend a dedicated PoE switch for reliable power and network performance, and we’ll include the right switch in your quote.
Q: Can I view my cameras on my phone? A: We set up the camera’s mobile app (such as UniFi Protect or the brand’s own app) during the install, so you can watch live video and get alerts on your smartphone.
Q: Which camera brands do you install? A: We stock and install Hikvision, Dahua, HiLook, UNV, Annke and Ubiquiti, offering a solid range of 2K and 4K options.
Q: Is HiVizz Security Australian‑owned? A: Yes – we’re an Australian‑owned, owner‑operated business based in Marong, serving Bendigo, Ballarat, Geelong, Melbourne and nearby towns like Castlemaine.
Next step
Want to protect your home or business? Call us on 0406 048 875 or email [email protected] and we’ll set up a free on‑site quote within 2 business days. You can also browse our online shop at hivizz.com.au for cameras and accessories, or click Get your free quote to get started.